Thermoplastic COUNTER (coated on both sides) on non-woven base with excellent shape reproduction and retention, as well as outstanding wear results.
With certificated quality and recommended by SATRA
| Types |
Thickness |
Advice of application |
| RF040 |
0.40~0.50mm |
children shoes, very light ladies & casual shoes. |
| RF060 |
0.55~0.65mm |
men & women casual shoes. |
| RF080 |
0.75~0.90mm |
casual shoes, running shoes. |
| RF0110 |
1.00~1.15mm |
lady pump, men’s shoes, boots, track & filed shoes. |
| RF0130 |
1.25~1.35mm |
men’s boots, hiking shoes, tennis shoes.
|
| RF0150 |
1.40~1.55mm |
hiking, working shoes, basketball shoes. |
| RF0170 |
1.65~1.90mm |
working shoes, basketball shoes, soccer. |
Remark: Please take notes the advice of application of above comes from the experiences of all existing clients. Please kindly chose the most suitable type of material for your shoe models.
Using Method: (All above materials require an interface temperature of 95-100℃ for bonding & 80-90℃ for reactivation.)
Cutting & Skiving Process:
Cutting: In length direction as indicated on the materials sheets, for obtain the best lasting result.
Skiving: Material can be skived on any side. Fine adjusting the inclined plane of bell-knife on skiving M/C with steel bottom roller to avoid wrinkle or X-ray effects caused.
Upper Preparing Process: (With Hot/Cold Pre-Molding System):
Setting hot mold with 110~120℃, 15 sec according to the thickness of upper materials. Setting times of cold mold for 30~35sec, according to the substance and lining. And ready for lasting process.
Lasting Conveyor Process:
Setting heat reactivated system of lasting conveyor on 80~90℃, 5~7 min. It makes thermoplastic counter reactivating again to obtain the perfect last shape reproduction and retention.
